null

Kingston 8Gb Ddr4 2666Mhz Sodimm

$79.00
SKU:
Condition:
New

Choose product options for more detail

$79.00
or 10 Payments of $42.99 with
or 10 payments of $42.99 with
or 12 months interest free with (min payment $250) learn more.
or 4 interest-free payments on orders over 19.75 with Zip - Buy now pay later.

Description

ValueRAM's KVR26S­19S8/8 is a 1G x 64-bit (8GB) DDR4–2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4–2666 timing of 19–19–19 at 1.2V. This 260-pin DIMM uses gold contact fingers.

FEATURES

  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP = 2.5V Typical
  • VDDSPD = 2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Single-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • PCB: Height 1.18” (30.00mm)
  • RoHS Compliant and Halogen-Free

SPECIFICATIONS

  • CL(IDD): 19 cycles
  • Row Cycle Time (tRCmin): 45.75ns(min.)
  • Refresh to Active/Refresh Command Time (tRFCmin): 350ns(min.)
  • Row Active Time (tRASmin): 32ns(min.)
  • Maximum Operating Power: TBD W*
  • UL Rating: 94 V – 0
  • Operating Temperature: 0 deg. C to +85 deg. C
  • Storage Temperature: –55 deg. C to +100 deg. C
 
Description

Description

ValueRAM's KVR26S­19S8/8 is a 1G x 64-bit (8GB) DDR4–2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4–2666 timing of 19–19–19 at 1.2V. This 260-pin DIMM uses gold contact fingers.

FEATURES

  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP = 2.5V Typical
  • VDDSPD = 2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Single-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • PCB: Height 1.18” (30.00mm)
  • RoHS Compliant and Halogen-Free

SPECIFICATIONS

  • CL(IDD): 19 cycles
  • Row Cycle Time (tRCmin): 45.75ns(min.)
  • Refresh to Active/Refresh Command Time (tRFCmin): 350ns(min.)
  • Row Active Time (tRASmin): 32ns(min.)
  • Maximum Operating Power: TBD W*
  • UL Rating: 94 V – 0
  • Operating Temperature: 0 deg. C to +85 deg. C
  • Storage Temperature: –55 deg. C to +100 deg. C
 
Delivery
Returns
Reviews