null
Skip to main content

Camera Retention Harness Toyota Hilux 2020 On 26 Pin

$112
Hurry! Only left
Tailor a custom payment plan to suit your needs. Learn more​
or 4 interest-free payments on orders over 28.00 with Zip - Buy now pay later.
Sorry, currently out-of-stock
Share:

Connects2

Camera Retention Harness Toyota Hilux 2020 On 26 Pin

$112
 

This video retention harness is designed for plug and play DIY installation of an aftermarket reverse camera (sold separately) in Toyota Hilux vehicles 2020 Onwards. It allows easy installation and integration of an aftermarket reverse camera to the OEM factory Toyota Hilux screen. (From June 2020 onwards, refer to photo of the OEM Toyota head unit as a reference).

This harness has been designed for simple plug and play installation into the Toyota Hilux vehicle, without the need of cutting or soldering any wires. It saves pulling apart the dash and trying to access the rear of the head unit area, whereas this harness simply plugs and plays into the harness location in the passenger footwell kick panel area.

Please note: The aftermarket camera (sold separately) that you are connecting to this harness will require it to have a voltage regulator as the red wire on this harness is from the 6 volt power source in the Hilux. The camera will also need to be set as NTSC image format to match the Toyota OEM screen.

Quick Installation Points:

Gaining access to the harness wiring in the vehicle:

  • Lift up and remove the passenger side door sill plate.
  • Remove the passenger side footwell kick panel.

Installing the camera harness with the vehicle harness wiring:

(WARNING: Ensure vehicle is switched off before disconnecting this plug)

  1. Unplug the factory harness plug from the passenger side footwell area.
  2. Plug the factory harness plug into the female end of this harness.
  3. Plug the male end of this harness into the factory harness socket in the vehicle.
  4. Plug the RCA plug from the camera extension cable (Camera sold separately) into the RCA socket on this harness.

Installing the aftermarket camera and testing:

  1. Install and wire the aftermarket camera as desired. (sold separately)
  2. Once this harness and the camera are installed, test it to make sure it is working and the viewing angle is suitable.
  3. Ensure all wiring is routed in the vehicle and to the rear of
 
Product Code: PID87626
 
Camera Retention Harness Toyota Hilux 2020 On 26 Pin
Camera Retention Harness Toyota Hilux 2020 On 26 Pin

Customer Reviews