RRP: $90
Zoom the image with the mouse
Share:
Part# MRC83R - Red LED - 433Mhz
Current - from mid 2011
- Battery type: CR2032 x 1
- Not interchangeable with each other
- The above frequencies are allocated by NZ Radio Service for 'short duration transmission' vehicle security use
- Compliance N4096 Z333
Replacement plastic case: Part# 242183
A new remote has to be memorized into your security system for it to operate - this is called 'code learning'. The coding instructions can be found in your owner's manual (which you can download from our website if yours is misplaced) or is detailed below.
To learn new remotes to M80 models:
- Disarm by existing remote, or use the override
- Open the driver's door and leave open
- Turn the ignition ON/OFF 3 times - siren chirps
- Press arm button on the first remote (siren chirps)
- Press arm button on the second remote (siren chirps)
- Repeat for any other remotes
- Wait 10 seconds for the learning process to complete
To learn new remotes to M80II & M80GII models:
- Disarm – open driver's door (Keep door open while programming) - LED starts fast flashing
- Within 10 seconds turn IGN on - the LED will now light solid for 10 seconds
- Within 10 seconds, turn IGN OFF then back ON
- The LED stays on & the siren chirps 3 times to confirm remote code learning mode
- Press button one on the new remote - siren chirps once to confirm
- Press button one on a 2nd remote you wish to learn – siren chirps twice to confirm
- To finish, turn the ignition off or wait 10 seconds to end programming - siren chirps quickly 3 times
NOTE:
Product Code:
PIDc41f9
Related Products
RRP: $90
RRP: $95
RRP: $90
RRP: $90
